Over 21 YEARS OF DEDICATION TO EXCELLENCE IN INSTRUMENTATION

The KLAY all stainless "VIBRA SWITCH" is based on a vibrating probe with two diaphragm-coupled rods which act as a single resonator. The VIBRA SWITCH is effective to control level in viscous, sticky, corrosive or sanitary liquids. A change to the resonant vibration caused by the arrival of liquid between the rods is signalled by the unit.

Shorter insertion length (down to 47mm) extensible to 3 metres Same all-stainless-steel construction Hygienic process connection Polished probes Available options: Instrinsically safe (EEx ia IIC T4), Halar (ECTFE) coated or highly polished probes (Ra < 0.5 um)

Click image for specifications in PDF

SPECIFICATIONS - STANDARD VIBRA SWITCH Process connections 1" BSP standard, 1"NPT, Milkcoupling DN40, TriClamp 2", Flange, Special - please specify Material Housing SS 304 Material probe SS 316L Insertion length 100mm standard. Long version 300mm to 4 metres Process Temperature -40 deg C to +150 deg C Ambient Temp -20 deg C to +60 deg C Maximum pressure 25 bar Maximum viscosity 10.000 mPas Minimum density 0.4 kg/l Protection grade IP66 Electrical conn. PG9 (Option 1/2"NPT) Switching Accuracy +/- 1 mm Hysteresis +/- 2 mm Power Supply A = 2-wire 16-250 Vac/dc. B = 3-wire 9-55 Vdc Output A = N.C. or N.O. contact. B = PNP/NPN

STANDARD VIBRA-SWITCH

APPLICATION EXAMPLES Max level detection in tank Min level detection in tank Dry run protection of pumps by mounting in feed line

Pressure

Level

Flow

Temperature

Valves

AMBIT Instruments Pty Ltd Head Office: 42 Titan Drive, Carrum Downs, Vic. Australia 3201 Freecall (Aust) 1800 101 102 Phone 03.9776.8888 Fax 03.9776.8656 email: contact@ambitinst.com.au

Sydney Sales Office: Unit 10, 272-274 Vicroria St. Wetherill Park NSW 2164 Phone: 02.9604.3544 Fax 02.9604.3677 email nswsales@ambitinst.com.au